2 Components
Service manual
38
ATXP20~3 FTXP20~7 ARXP20~3
RXP20~71L2V1B
Split Comfora R32
ESIE18-01 – 2019.02
f
a
d
c
b
e
a
Electrical power supply wiring
b
Wire terminals
c
Screws
d
Wire clamp
e
Screws
f
Right side plate assembly
3
Connect the electrical power supply wiring to the wire terminals.
4
Install the wire clamp and fix it using the screws.
5
Connect all connectors to the main PCB.
INFORMATION
Use the wiring diagram and connection diagram for correct
installation of the connectors, see
.
WARNING
When reconnecting a connector to the PCB, do NOT apply
force, as this may damage the connector or connector pins
of the PCB.
6
Fix the wiring to the switch box using a new cable tie.
a
b
a
Cable tie
b
Switch box
7
Install the insulation on the upper side of the switch box.
a
b
a
Insulation
b
Main PCB
2.10.2
Indoor unit
To open the front panel
1
Hold the front panel by the panel tabs on both sides and open
it.
To close the front panel
1
Install the air filters and the titanium apatite deodorizing filters
back in their original positions.
2
Gently press the front panel at both sides and at the center until
it clicks.
