OH08-1
Remote Controller (Wireless Type)
Control Systems
55
2
Heating capacity & Outdoor air temperature
z
Heating capacity drops as outdoor air temperature lowers. If feeling cold, use another heater at the
same time as this air conditioner.
z
Hot air is circulated to warm the room. It will take some time from when the air conditioner is first started
until the entire room becomes warm. The internal fan automatically turns at low speed until the air
conditioner reaches a certain temperature on the inside. In this situation, all you can do is wait.
z
If hot air accumulates on the ceiling and feet are left feeling cold, it is recommended to use a circulator.
For details, contact the place of purchase.
(3) Adjustment
For programming TEMPERATURE, FAN SPEED and AIR FLOW DIRECTION, follow the procedure shown
below.
TEMPERATURE SETTING
Press TEMPERATURE SETTING button and program the setting temperature.
Each time this button is pressed, setting temperature rises 1°C.
Each time this button is pressed, setting temperature lowers 1°C.
In case of automatic operation
Each time this button is pressed, setting temperature shifts to “H” side.
Each time this button is pressed, setting temperature shifts to “L” side.
[
°
C]
z
The setting is impossible for fan operation.
NOTE
z
The setting temperature range of the remote controller is 16°C to 32°C.
FAN SPEED CONTROL
Press FAN SPEED CONTROL button.
Fan speed (HH, H, L) can be selected.
The microchip may sometimes control the fan speed in order to protect the unit.
DOWN
UP
H
•
M
•
L
Setting
temperature
25
23
22
21
19
DOWN
UP
DOWN
UP
FAN
2
.3
B
R
C
7
F
6
3
4
F
/
B
R
C
7
F
6
3
5
F