Remote Controller (Wireless Type)
OH08-1
52
Control Systems
Placing the remote controller in the remote controller holder
Install the remote controller holder to a wall or a pillar with the attached screw. (Make sure it transmits)
How to put the dry batteries
(1) Remove the back cover of the remote controller to the direction pointed by the
arrow mark.
(2) Put the batteries
Use two LR03<IEC> dry cell batteries.
Put dry batteries correctly to fit their (+ ) and (– ).
(3) Close the cover
When to change batteries
Under normal use, batteries last about a year. However, change them whenever the indoor unit doesn’t
respond or responds slowly to commands, or if the display becomes dark.
[CAUTIONS]
z
Replace all batteries at the same time, do not use new and old batteries intermixed.
z
In case the remote controller is not used for a long time take out all batteries in order to prevent liquid
leak of the battery.
IN THE CASE OF CENTRALIZ ED CONTROL SYSTEM
If the indoor unit is under centraliz ed control, it is necessary to switch the remote controller’s setting.
In this case, contact your DAIKIN dealer.
Placing the remote
controller
Slide from above
Remote
controller
holder
Removing the
remote controller
Pull it upward