44
Example 2
1 :
You open the window.
Result:
The unit stops immediately. It is not possible to turn the unit on or off with the
ON/OFF button, the Setback functionality does not work, and the delay timer does not
start counting.
2 :
You remove the key card.
Result:
The delay timer starts counting.
3 :
You close the window again.
Result:
There is no change in state. It is as if you never opened the window (Setback
will work if enabled).
IF
the delay timer HAS expired before closing the window, the reset timer will have
started counting. Closing the window has no influence on the reset timer.
IF
the delay timer HAS NOT expired before closing the window, it will expire
immediately and the reset timer will start counting.
When the reset timer expires, the previous state is updated to the “Default Reset
Setting” state.
4 :
You insert the key card again.
Result:
IF
the reset timer HAS NOT expired before inserting the key card, the unit returns to the
state before the window was opened (last “on” state);
IF
the reset timer HAS expired before inserting the key card, the unit goes to the
“Default Reset Setting” state.
