Daikin BRC1E51A7, Operation Manual

Page: 12 / 56

English 11
Operation mode 1.
Used to display the present operation ●
mode Cool, Heat, Vent, Fan, Dry or Auto
mode.
Automatic operation mode 2.
Used to display the present automatic ●
operation mode (Cool or Heat).
Fan speed 3.
Used to display the fan speed that is set for ●
the air conditioner.
The fan speed will not be displayed if the
●
air conditioner does not have fan speed
control function.
Set temperature display 4.
Used to display the temperature set for the ●
air conditioner.
Defrost/Hot start “ 5. ”
(See page 16.)
If Ventilating operation “ ” is displayed:
Displayed when a total heat exchanger ●
unit, such as the Ventiair, is connected.
For details, refer to the Operation Manual
of the Ventiair.
Message 6.
The following messages are displayed.
“This function not available.”
Displayed for a few seconds when an ●
operation button is pressed if the indoor
unit is not provided with the corresponding
function.
If a number of indoor units are in operation,
●
the message will appear only if none of the
indoor units is provided with the
corresponding function, i.e., the message
will not appear if at least one of the indoor
units is provided with the corresponding
function.
“Error: Press Menu Button.”
“Warning: Press Menu Button.”
Displayed if the error or warning is detected ●
(see page 53) .
“Quick Cool/Heat” (SkyAir only)
Displayed if the quick cooling/heating ●
function is turned ON (see page 31).
“Clean the fi lter.”
“Clean the element.”
“Clean the
fi lter and element.”
Displayed when the time to clean the fi lter ●
or element has come (see page 51).
Ventilation / Purifying 7.
Displayed when a total heat exchanger ●
unit, such as the Ventiair, is connected.
Ventilation mode icon.“ ● ”
These icons indicate the current ventilation
mode (HRV only) (AUTOMATIC, HEAT
EXCHANGE, BYPASS).
AIR Purifying ICON “ ● ”
This icon indicates that the air cleaning unit
(option) is operational.
8. display
(See page 23.)
Displayed when the key lock is set. ●
9. display
(See page 34.)
Displayed if the schedule timer or OFF ●
reminder timer is enabled.
Under Centralized control “ 10. ”
Displayed if the system is under the ●
management of central control equipment
(optional accessories) and the operation of
the system through the remote controller is
prohibited.
Changeover under control “ 11. ”
(VRV only)
Displayed on the remote controller if the ●
remote controller has no cooling/heating
selection eligibility mode
(see page 21) .
01_EN_3P243520-1B.indd 11 01_EN_3P243520-1B.indd 11 5/15/2009 10:21:02 AM 5/15/2009 10:21:02 AM