English
9
Operation mode selector button
1.
Press this button to select the operation
●
mode of your preference.
(See page 14.)
Available modes vary with the connecting
*
model.
Fan speed control button
2.
Press this button to select the fan speed of
●
your preference.
(See page 15.)
Available fan speed vary with the
*
connecting model.
Menu/Enter button
3.
Used to indicate the main menu.
●
(See page 24 for the menu items.)
Used to enter the setting item selected.
●
Up button
4.
(Be sure to press the
part with the symbol )
Used to raise the set temperature.
●
The next items on the upper side will be
●
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected.
●
Down button
5.
(Be sure to press
the part with the symbol )
Used to lower the set temperature.
●
The next items on the lower side will be
●
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected.
●
Right button
6.
(Be sure to press
the part with the symbol )
Used to highlight the next items on the
●
right-hand side.
Each screen is scrolled in the right-hand
●
direction.
Home leave settings are enabled with this
●
button kept pressed for at least four
seconds.
(See page 19.)
Left button
7.
(Be sure to press
the part with the symbol )
Used to highlight the next items on the
●
left-hand side.
Each screen is scrolled in the left-hand
●
direction.
Home leave settings are enabled with this
●
button kept pressed for at least four
seconds.
(See page 19.)
On/Off button
8.
Press this button and system will start.
●
Press this button again and system will
●
stop.
Operation lamp (Green)
9.
This lamp lights up during operation.
●
This lamp blinks if a error occurs.
●
Cancel button
10.
Used to return to the previous screen.
●
LCD (with backlight)
11.
The backlight will be light for approximately
●
30 seconds by pressing any operation
button. Operate buttons excluding the On/
Off button while the backlight is lit.
If two remote controllers are used to control
●
a single indoor unit, the backlight of the
remote controller operated earlier than the
other one will be lit.
01_EN_3P243520-1B.indd 9
01_EN_3P243520-1B.indd 9
5/15/2009 10:21:01 AM
5/15/2009 10:21:01 AM
