Daikin BRC1E51A7 Operation Manual Download Page 15

Page: 15 / 56

English

Cool/Heat/Auto/Fan Operation

(SkyAir and VRV)

Operation Method

●

Displays the main menu screen.

(See page 26.)

●

Press buttons to select

Timer setting

on the main menu

screen.
Press Menu/Enter button to display
the timer settings screen.

* Items presently enabled or disabled are
displayed.

Return

Setting

MainMenu
Set temp mode changeover
Airflow Direction
Quick Cool/Heat On/Off
Ventilation

Timer setting

Service Contact/Model info

1/2

Return

Setting

Timer setting

Schedule timer

Off reminder timer

Disable

2/2

Operation screen
display

Describes screens that
will be displayed on the
remote controller in
operation.

Operation procedure

Explains a button operation

procedure for the remote controller.

Operate the buttons according to

the procedure.

Operation button
display

Displays the positions of
buttons to be operated.

Remote Controller Functions

Preparation

For mechanical protection purposes, turn ON the system at least six hours before starting the

●

operation of the system.
Do not turn OFF the system in season in order to ensure the smooth starting of the system.

●

Operation Method

Set temperature

°C

Cool

Return Setting

Press Operation Mode Selector button

●

several times until the desired mode
Cooling, Heating, Fan, or Auto mode is
selected.

Unavailable operation modes are not displayed.

Only the Cooling or Fan mode can be selected if the air

conditioner is a cooling-only model.
The Auto mode can be set in the case of the VRV cooling/

heating simultaneous operation system.
Changeover under control will appear on each remote controller,

but only the Cooling or Fan mode can be set in the case of the
VRV cooling-only system.

Note

Before making a mode change, make sure that Changeover

●

under control is not displayed on the remote controller.
The cooling or heating mode cannot be selected if the above is
displayed on the remote controller. See page 21 if Changeover
under control display blinks.

Basic Operation Method

(Use of Direct Buttons)

01_EN_3P243520-1B.indd 14

5/15/2009 10:21:03 AM

Summary of Contents for BRC1E51A7

























































Search results

Summary of Contents for BRC1E51A7

Reviews:

Related manuals for BRC1E51A7

Brands by name

Popular brands

Daikin BRC1E51A7, Operation Manual

Search results

Summary of Contents for BRC1E51A7

Reviews:

Related manuals for BRC1E51A7

Brands by name

Popular brands