22
English
Operation Selection
3
Set temperature
28
°C
Cool
Return Setting
Press the remote controller that has the
●
cooling/heating selection eligibility (or
the remote controller without the display
“
” (Changeover under control))
several times until the desired mode is
selected. The display will change to
“Fan”, “Dry”, “Auto”, “Cool”, “Heat” each
time the button is pressed.
The display “Auto” will appear for the
●
heating/cooling simultaneous operation
system only.
At that time, the other remote controllers
with no selection right will follow suit and
change the display automatically.
Cool/Heat Selection Eligibility
The “Cool”, “Heat”, “Auto” can be set for only the remote controller for which the cooling/heating
●
selection eligibility is set.
(The display “Auto” will appear for the heating/cooling simultaneous operation system only.)
1.
The remote controller with
the selection eligibility
Set to “Cool”, “Heat”,
“Dry”, “Auto” mode.
Other remote controllers
(without “
”
(Changeover under
control) displayed)
(with “
”
(Changeover under
control) displayed)
The system will go into the mode set in
●
the remote controller. No other modes
are available.
The system, however, can be switched
●
to fan mode or from “Cool” to “Dry”.
2.
The remote controller with
the selection eligibility
Set to “Fan” mode.
Other remote controllers
(without “
”
(Changeover under
control) displayed)
(with “
”
(Changeover under
control) displayed)
The system cannot be set to other
●
modes except fan mode.
Basic Operation Method
(Use of Direct Buttons)
01_EN_3P243520-1B.indd 22
01_EN_3P243520-1B.indd 22
5/15/2009 10:21:07 AM
5/15/2009 10:21:07 AM
