Daikin BDU510B250VM, Installation Manual

Page: 6 / 12

Packaged Air Conditioner Drain Pump Kit - BDU510B250VM
5
Connector X15A
Connector X25A
Indoor unit
(included)
Rubber bush
Wires Clamp
(inside control box)
Drain pump and
À
oat
switch lead wires
Control box
(included)
Cable tie 2 and Plastic band
Drain connection pipe 1
(included)
Cable tie 1
DRAIN PUMP LEAD WIRE
X25A X15A
INDOOR UNIT PRINT
MP
CIRCUIT BOARD
INDOOR UNIT
DRAIN PUMP ASSY
SWITCH
FLOAT
LEAD WIRE
FLOAT SWITCH
6. TRIAL OPERATION PROCEDURE
CAUTION
• Be sure to turn OFF the power to the indoor unit before starting the procedure below.
1. Check again that the installation and electrical wiring procedures for the drain pump kit have been completed properly.
2. Remove the inspection port cover from the drain pump kit and service panel from the Indoor unit (Refer to fi gure below).
Indoor unit
Drain pump kit
Inspection port cover
Screws (4pcs.)
Service panel
Screws (7pcs.)
3. To check the drain condition of the drain pump kit, pour approximately 3 litres of water from the service panel opening into drain pan
(Refer to fi gure below).
4. Ensure that the water fl ows out smoothly without leakage.