8 Configuration
Installer reference guide
69
EPGA11~ EAVH/9W
Daikin Altherma – Low temperature split
4P556070-1 – 2019.02
8.6
Menu structure: Overview installer settings
[9.C] Bivalent
Bivalent
Boiler efficiency
Temperature
Hysteresis
[9.B] Sensors
External sensor
Ext. amb. sensor offset
Averaging time
[9.6] Balancing
Space heating priority
Priority temperature
Offset BSH setpoint
Minimum running timer
Anti-recycle timer
Maximum running timer
Additional timer
[9.3] Backup heater
Backup heater type
Voltage
Configuration
Additional capacity step 2
Capacity step 1
Equilibrium
Equilibrium temperature
Operation
[9.8] Benefit kWh power supply
Benefit kWh power supply
Allow heater
Allow pump
[9.2] Domestic hot water
Domestic hot water
DHW pump
DHW pump schedule
Solar
[9.9] Power consumption control
Power consumption control
Type
Limit
Limit 1
Limit 2
Limit 3
Limit 4
Priority heater
Electricity meter 2
Electricity meter 1
[9.A] Energy metering
[9]Installer settings
Configuration wizard
Domestic hot water
Backup heater
Emergency
Balancing
Water pipe freeze prevention
Benefit kWh power supply
Power consumption control
Energy metering
Sensors
Bivalent
Alarm output
Auto restart
Power saving function
Disable protections
Overview field settings
Forced defrost
INFORMATION
Solar kit settings are shown but are NOT applicable for this
unit. Settings shall NOT be used or changed.
INFORMATION
Depending on the selected installer settings and unit type,
settings will be visible/invisible.
Summary of Contents for Altherma EAVX-D9WG
Page 103: ......
