3 About the box
Installer reference guide
8
EPGA11~ EAVH/9W
Daikin Altherma – Low temperature split
4P556070-1 – 2019.02
3.2.3
To remove the accessories from the
outdoor unit
1
Open the outdoor unit.
2
Remove the accessories.
1×
2×
2×
1×
1×
ENERG
IJA
Y
IA
IE
ENERG
IJA
Y
IA
IE
1×
RXXX
1×
1×
a
d
e
b
c
a
Outdoor unit installation manual
b
Fluorinated greenhouse gases label
c
Multilingual fluorinated greenhouse gases label
d
Shut-off valve (with integrated filter)
e
Energy label
3.2.4
To remove the transportation stay
NOTICE
If the unit is operated with the transportation stay attached,
abnormal vibration or noise may be generated.
The compressor transportation stay must be removed. It is installed
under the compressor leg in order to protect the unit during
transport. Proceed as shown in the figure and procedure below.
1
Remove the nut (a) of the compressor mounting bolt.
2
Remove and discard the transportation stay (b).
3
Re-install the nut (a) of the compressor mounting bolt and
tighten to 10.1 N•m of torque.
(10.1 N·m)
a
1
3
2
b
3.3
Indoor unit
3.3.1
To unpack the indoor unit
1
2
8×
3.3.2
To remove the accessories from the
indoor unit
4×
8×
1×
4×
1×
1×
1×
1×
1×
a
b
g
h
i
c
d
e
f
a
Shut-off valves for water circuit
b
Overpressure bypass valve
c
General safety precautions
d
Addendum book for optional equipment
e
Indoor unit installation manual
f
Operation manual
g
Sealing rings for shut-off valves (space heating water
circuit)
h
Sealing rings for field-supplied shut-off valves (domestic
hot water circuit)
i
Sealing tape for low voltage wiring intake
3.3.3
To handle the indoor unit
Use the handles at the back and at the bottom to carry the unit.
Summary of Contents for Altherma EAVX-D9WG
Page 103: ......
