background image

1-11

English

INSTALLATION OF THE INDOOR UNIT

FG(Y)M(P) 75~100D

800.0

800.0

800.0

FGY(P) 250~600E

800.0

800.0

800.0

1000.0

FG(P) 200 ~ 500D

800.0

1000.0

**1500.0

800.0

800.0

Mounting

Ensure that the overhead supports are strong enough to hold 
the unit’s weight. Position hanger rods and check for alignment 
with the unit. Check that hangers are secure and that the 
base of fan-coil unit is level in the two horizontal directions, 
taking into account the gradient recommended for drainage 
flow as shown.
Check the gradient recommended for drainage flow as 
follow.

Provide clearance for servicing and optimal air flow as shown 
in the diagram.
The indoor unit must be installed such that there is no short 
circuit of cool discharge with air discharge.
Respect the installation clearance.

300mm

300mm*

50mm

500mm

* for free return of air

300mm

10.0

All dimensions in mm

FD(P) 125 ~ 150D / FDY(P) 125~200E

800.0

800.0

800.0

Note: **For FGY(P) 400-600E

1-IM-CC&SB-D_ER-0412(0)-DAIKIN-E11   11

1-IM-CC&SB-D_ER-0412(0)-DAIKIN-E11   11

7/20/12   2:15:18 PM

7/20/12   2:15:18 PM

Summary of Contents for 2FD150DXY1





























Reviews: