(17) Pull out the oil level gauge and wipe off the engine oil.
(18) Reinsert the oil level gauge as far as it will go.
(19) Pull out the oil level gauge again.
(20) Ensure that the engine oil level is between the “L” and
“F” levels on the oil level gauge.
If the engine oil level is below the “L” level, replenish
the specified engine oil to the “F” level.
(21) Close the oil filler cap.
WARNING:
·
Securely close the oil filler cap to the cylinder head
cover. Failure to observe this warning will cause engine
seizure and fire.
MA–14
(22) Start the engine.
(23) Warm up the engine to normal operating temperature.
(24) Stop the engine.
(25) After a few minutes, slowly pull out the oil level gauge
and wipe off the engine oil.
(26) Reinsert the oil level gauge as far as it will go.
(27) Pull out the oil level gauge again and check to see if
the oil level is between “F” and “L” levels.
If the engine oil level is low, replenish the specified en-
gine oil to the “F” level of the oil level gauge.
(28) Reinsert the oil level gauge as far as it will go.
2. Inspection of spark plug
Inspection of electrode
When a megger is available:
(1) Removal of air cleaner
q
Disconnect the hoses connected to the air cleaner
case cover.
NOTE:
·
Prior to the disconnection of the rubber hose, put a tag
on each of the rubber hoses so that it may be recon-
nected correctly to the original position.
w
Displace the hose band of the air duct connected
to the throttle body.
e
Unlock the four clips of the air cleaner case cover.
r
Remove the air cleaner element.
t
Remove the air cleaner case by removing the three
attaching bolts.
TEMP.
˚C
˚F
–29
–20
–18
0
–7
20
4
40
16
60
27
80
38
100
*10W-30, 10W-40, 10W-50
5W-30
30
20
Engine oil
(4 stroke)
20W-40, 20W-50
Low level
Full level
JMA00032-00025
JMA00000-00026
JMA00034-00000
JMA00035-00027
JMA00036-00028
