BRAKE BOOSTER HOSE
COMPONENTS
MA–34
CHECK OF VACUUM HOSE
1. Visually check vacuum hose for aging, cracks, scratches
or cut.
If any damage exists, replace the vacuum hose with a new
one.
2. Disconnect the vacuum hose from the brake booster.
3. Ensure that the negative pressure is retained when apply-
ing negative pressure to the disconnected hose.
If not, replace the vacuum hose with a new one.
4. Ensure that the air continuity exists when air is blown into
the vacuum hose from the brake booster side.
If not, replace the vacuum hose with a new one.
5. Connect the vacuum hose to the brake booster.
6. Install new hose bands.
CAUTION :
·
Never reuse the removed hose bands.
·
Insert the vacuum hose up to the spool of the brake
booster.
B
o
N
N
LHD
RHD
t
i
u
u
t
e
q
y
t
r
t
w
t
e
q
y
t
r
w
25.5
±
2.9
(2.6
±
0.3)
9.8 - 15.7
(1.0 - 1.6)
25.5
±
2.9
(2.6
±
0.3)
9.8 - 15.7
(1.0 - 1.6)
★
★
JMA00097-00076
JMA00098-00077
JMA00099-00078
q
Brake booster assembly
w
Master cylinder push rod clevis
e
Brake booster bracket gasket
r
Union to connector tube
t
Clip
y
Union
u
Intake manifold tube clamp
i
Intake manifold to connector tube
o
Union to check valve hose
: Tightening torque
Unit : N·m (kgf-m)
★
: Non-reusable parts
