Figure 3-5
SN
Function
Note
1
Quick Position
It is the function of quick position. Use mouse to draw a box in
the monitoring image of tracking speed dome, and the PTZ will
quickly position to the scene.
2
Direction Button
It supports 8 directions, which are up, down, left, right, upper
left, upper right, lower left and lower right.
3
Speed
It is mainly used for speed operation, the bigger the step length
is, the faster the speed becomes. The step length is only valid to
PTZ direction control.
4
Zoom, Focus, Iris
Click
and corresponding parameter value becomes bigger,
click
and corresponding parameter value becomes
smaller.
5
PTZ Function
Note
It needs to complete 4.3 Set PTZ Function before using PTZ
function.
The supported PTZ functions include:
Scan
Click
Start
and the camera will automatically scan back and
forth in the area which has been set.
Preset
Select preset number, click
Check
and the camera will move to
the corresponding location of the preset.
Tour
Select tour number, click
Start
and the camera will automatically
move back and forth according to the preset sequence which
has been set.
Pattern
Select pattern number, click
Start
and the camera will
automatically move back and forth according to the moving
trajectory which has been set.
Assistant
Reserve extended function.
Go to
Input the needed horizontal and vertical angle, click
Go to
and it
can accurately position some spot.
Table 3-4
3.1.3.6
Window Layout
Select display layout of the channel image.
