Figure 4-73
Step 2
Select "Preset" and the camera will quickly move to the corresponding position of the preset.
Note
It needs to implement the step when the device supports to select preset.
Step 3
Add detect area and exclude area.
1. Click "Add Detect" and draw detection area on the monitoring image, right click to end drawing.
Note
Click "Add Detect" again to draw detection area again.
2. Click "Add Exclude" and draw excluded area in the detection area, right click to end drawing.
Note
Click "Delete" to delete exclude area.
Only the exclude areas which are drawn in the detection area are valid.
It supports to draw several exclude areas.
