Step 1
Select "Setup > Event > Smart Plan" and the system will display the interface of "Smart Plan".
Step 2
Select "Channel" as "2" or "3" and the system will display the smart plan interface of panorama camera,
which is shown in Figure 4-63.
Figure 4-63
Step 3
Click IVS to enable corresponding intelligent function.
The selected function will be displayed with high brightness, click the selected function to cancel it.
Step 4
Click "Save" to complete setting.
4.4.5
Set IVS
4.4.5.1
Basic Requirements of Scene Selection
The total proportion of the target shall not exceed 10% of the image.
The target size in the image can
’t be less than 10 pixel
×
10 pixel, the size of abandoned target
can
’t be less than 15 pixel
×
15 pixel (CIF image); The height and width of the target can
’t exceed
1/3 of the image; it is recommended that the target height is about 10% of the image height.
The difference of brightness value between target and background can
’t be less than 10 gray levels.
