Parameter
Function
Relay-out
Connect alarm output port to alarm device (such as lamplight, siren and so
on), select check box and set alarm output device, enable alarm linkage
output port, and the system can activate corresponding alarm output device
when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended.
Send Email
Select check box, and the system will send email to inform users when
Alarm occurs.
Note
It needs to set Email before enabling the function, please refer to "4.2.6 Set
SMTP Parameter" for more details.
Table 4-42
Step 5
Click "Save" to complete setting.
4.4.10.2
Network Abnormity
The system will generate alarm and activate the actions which have been set when network is abnormal.
The network abnormity includes network disconnection and IP conflict.
Step 1
Select "Setup > Event > Abnormity > Network" and the system will display the interface of "Network",
which is shown in Figure 4-82.
Figure 4-82
