Dahua NVR4216-16P-4 Full Manual Download

Page: 51 / 135

Note

：

This function is available only on DVR7XXX series and HCVR74XXL, HCVR78XXS,

HCVR5424/32L (-S2), HCVR5824/32S (-S2). It is to overlay one picture on another picture in

1-window mode.

Right click and select “View PIP” in the Menu. You can switch the position of the large

window and the small window. Left click the small window, you can drag it to any

position you desire. And move the mouse to the margin, you can drag to zoom in or zoom

out.

On the preview interface of the channel 1, right click mouse and then select channel 11,

you can overlay video from channel 11 on the channel 1. See Figure 4-17 and Figure 4-18.

4.13 How to use the second HDMI

Figure 4-19

Note

：

This function is available only on DVR7XXX series and HCVR74XXL, HCVR78XXS,

HCVR5424/32L (-S2), HCVR5824/32S (-S2).

Main Menu->Setting->System->Display, you can go to the following interface. See Figure

4-19.

The second HDMI output only support preview and tour function and IP camera not

supported. Other settings are similar with tour.

Summary of Contents for NVR4216-16P-4








































































































































Search results

Summary of Contents for NVR4216-16P-4

Reviews:

Related manuals for NVR4216-16P-4

Brands by name

Popular brands

Dahua NVR4216-16P-4, Full Manual

Search results

Summary of Contents for NVR4216-16P-4

Reviews:

Related manuals for NVR4216-16P-4

Brands by name

Popular brands