User's Manual
266
Parameter
Description
Report Alarm
Select the check box. When an alarm occurs, the NVR device uploads
an alarm signal to the network (including the alarm center).
● This function is for some series products only.
● You need to set the alarm center first. For details, see "4.12.13
Alarm Center".
Send Email
Select the check box. When an alarm occurs, the NVR device sends an
email to the set mailbox to notify the user.
You need to set the email first. For details, see "4.12.10 Email".
Record Channel
Select the check box and select the needed recording channel (support
multiple choices). When an alarm occurs, the NVR device activates the
channel for recording.
You need to enable intelligent recording and auto recording first. For
details, see "4.1.4.6 Schedule".
PTZ Linkage
Select the check box and click
Setting
to select the channel and PTZ
action. When an alarm occurs, the NVR device associates the channel
to perform the corresponding PTZ action. For example, activate the
PTZ in channel one to turn to the preset point X.
● Tripwire alarm supports to activate PTZ preset point only.
● You need to set the corresponding PTZ actions first, see "4.4.4
Calling PTZ Functions".
Post Record
At the end of the alarm, the recording extends for a period of time. The
time range is from 10 seconds to 300 seconds.
Tour
Select the check box and select the channel for tour. When an alarm
occurs, the local interface of the NVR device displays the selected
channel screen.
● You need to set the time interval and mode for tour first, see "4.17.2
Tour".
● After the tour is over, the preview interface is restored to the screen
split mode before the tour.
Picture Storage
Select the
Picture Storage
check box to take a snapshot of the
selected channel.
To use this function, select
Main Menu
>
Camera
>
Encode
>
Snapshot
, and then select
Event (Trigger)
in
Type
list.
Log
Select the check box, the NVR device records the alarm information in
the log when an alarm occurs.
Summary of Contents for NVR41 series
