User's Manual
102
After the Device is rebooted, the settings have been restored to the factory default.
You can start resetting the password.
4.1.4 Quick Settings
After you successfully initialized the device, it goes to startup wizard. Here you can quickly
configure your device. Click
Next
, device goes to
General
interface.
The startup wizard interface only displays after you first login the device and have set the
admin password. See Figure 4-15.
Figure 4-15 Startup wizard
● If you select the
Auto Check for Updates
check box, the system will notify you
automatically when updates are available.
● After the auto-check function is enabled, to notify you to update timely, the system will
collect the information such as IP address, device name, firmware version, and device
serial number. The collected information is only used to verify the legality of the Device and
push upgrade notices.
● If you cancel the
Auto Check for Updates
check box, the system will not perform
automatic checks.
4.1.4.1 General
You can set NVR basic information such as system date, holiday and etc. You can also
configure general settings by selecting
Main Menu
>
SYSTEM
>
General
.
4.1.4.1.1 General
You can set device basic information such as device name, serial number.
Step 1 Click
Next
.
The
Basic
interface is displayed. See Figure 4-16.
Summary of Contents for NVR41 series
