27
and 0 means disabled. It is 0 by default.
Step 1
Press
to go to the setting interface, and then select
CF
.
Step 2
Press
and
to enter the value.
●
0: Disabled
●
1: Enabled.
Figure 4-24 Setting infrared start-stop
4.2.3.9 Managing Zone
The door panel can be set to 18, 12 or 6 zones.
Step 1
Press
to go to the setting interface, and then select
FL
.
Step 2
Press
and
to enter the security level.
Figure 4-25 Managing zone
4.2.3.10 Setting Alarm
You can set alarm parameters, including tone, volume, and duration.
4.2.3.10.1 Setting Alarm Tone
You can select one alarm tone from the 99 built-in tones, and the selected one will be played when
an alarm is triggered.
Step 1
Press
to go to the setting interface, and then select
yd
.
Step 2
Press
and
to enter the value.
Figure 4-26 Setting alarm tone
4.2.3.10.2 Setting Alarm Duration
The time that an alarm lasts. It ranges from 0 to 99 ( unit: Second). The bigger the number is, the
longer the duration is.
Step 1
Press
to go to the setting interface, and then select
yL
.
