25
Figure 4-21 Setting frequencies
4.2.3.6 Setting Infrared Start-stop
Infrared start-stop is designed for longer service life of the Device. You can set four modes of the
light alarm: Start the front group, start the back group, start both groups, and close both groups.
Step 1
Press
to go to the setting interface, and then select
1R
.
Step 2
Press
and
to enter the value.
●
Start the front group: The two front alarm lights will be on when an alarm is triggered,
and the alarm times will be updated in real-time.
●
Start the back group: The two front alarm lights will be on when an alarm is triggered,
and the alarm times will be updated in real-time.
●
Start both groups: The four alarm lights of both sides will be on when an alarm is
triggered, and the alarm times will be updated in real-time.
●
Close both groups: The four alarm lights of both sides will not be on when an alarm is
triggered, but the alarm times will be updated in real-time.
Figure 4-22 Setting infrared start-stop
4.2.3.7 Setting Application Scenarios
The Device supports 72 scenarios, and every scene corresponds to different sensitivity level. After
selecting the scene, the Device sets the suitable sensitivity level for each scene automatically.
Step 1
Press
to go to the setting interface, and then select
Cj
.
Step 2
Press
and
to enter the value.
Table 4-5 Scenario number
No.
Scenario
No.
Scenario
No.
Scenario
1
Court
25
Celebration
49
Embassy
2
Prison
26
Entertainment
venue
50
Power plant
3
Procuratorate
27
Performance
venue
51
Hotel
4
Customs
28
KTV
52
Swimming pool
5
Border
29
Bar
53
Public security
bureau
