Dahua HFD23 Page 156 User Manual Download

Page: 156 / 190

145

Parameter

Function

Attempt(s)

It is to set login attempt times. Once the login attempt exceeds the

threshold you set here, current account will be locked. This function is

for illegal login only.

Lock time

It is to set account lock time once its login attempt has exceeded the

threshold you set. This function is for illegal login only.

Max

Temperature

The device can generate an alarm once the device temperature is

higher than the threshold you set. This item is for temperature too high

type only.

Show
message

System can pop up a message to alarm you in the local host screen if

you enabled this function.

Alarm
upload

System can upload the alarm signal to the center (Including alarm
center.

Send Email If you enabled this function, System can send out an email to alert you

when an alarm occurs.

Note

Make sure you have enabled email function. Refer to chapter 5.6.2.7
Email for detailed information.

Buzzer

Check the box here to enable this function. The buzzer beeps when an
alarm occurs.

Log

Check the box here, system can record corresponding alarm log.

Restart
system

Check the box here, system will restart automatically after 3 minutes if
there is no HDD.

5.6.3.4 Alarm Out

Here you can set alarm output channel mode: Auto/manual/stop.

From Setup->Event->Alarm output, enter alarm output interface. See Figure 5-54.

Figure 5-54

Please refer to the following sheet for detailed information.

Summary of Contents for HFD23































































































































































































Search results

Summary of Contents for HFD23

Reviews:

Related manuals for HFD23

Brands by name

Popular brands

Dahua HFD23, User Manual

Search results

Summary of Contents for HFD23

Reviews:

Related manuals for HFD23

Brands by name

Popular brands