Dahua HFD23 Page 111 User Manual Download

Page: 111 / 190

100

4.4 System Maintenance

4.4.1

Maintenance Requirements

To guarantee device proper operation and device safety, please follow the instructions listed

below to manage, backup and maintain the device.



Check the monitor video regularly.



Delete the inactive user or user group regularly.



Change device password each three months.



Check and analyze system log, process the abnormal event in time.



Backup device configuration files.



Reboot and delete old files regularly.



Upgrade firmware in time.

4.4.2

System Info

It is to view device version information, satellite information, log information, bit stream information

and etc.

4.4.2.1 Version

It is to view version information and release date.

On the main menu, from Info->Version, enter version interface. See Figure 4-96.

Figure 4-96

4.4.2.2 Device

It is to view ACC status, voltage, record status, HDD status, GPS status, DSS registration status,

3G dial status, Wi-Fi connection status.

On the main menu, from Info->Device, enter Device interface. See Figure 4-97.

Click Details button to view the detailed information.

Summary of Contents for HFD23































































































































































































Search results

Summary of Contents for HFD23

Reviews:

Related manuals for HFD23

Brands by name

Popular brands

Dahua HFD23, User Manual

Search results

Summary of Contents for HFD23

Reviews:

Related manuals for HFD23

Brands by name

Popular brands