155
Parameter Function
Default setup is console.
Console is for you to use the COM or mini-end software to
upgrade or debug the program.
The control keyboard is for you to control the device via the
special keyboard.
Transparent COM (adapter) is to connect to the PC to transfer
data directly.
Network keyboard is for you to use the special keyboard to
control the device.
PTZ: Use COM to control the PTZ.
ITS: Connect to mobile light box or touch screen.
Baud Rate Select the baud rate.
Default setup is 115200.
Data Bit
The value ranges from 5 to 8.
Default setup is 8.
Stop bit
There are two options: 1/2.
Default setup is 1.
Parity
There are five options: none/odd/even/space/mark.
Default setup is none.
5.6.5.4 PTZ
From main menu->Setup->System->PTZ, the PTZ interface is shown as in Figure 5-68.
Before setup, please check the following connections are right:
PTZ and decoder connection is right. Decoder address setup is right.
Decoder A (B) line connects with DVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to control
speed dome.
Figure 5-68
Please refer to the following sheet for detailed information.
Parameter
Function
Channel
Select PTZ camera connected channel.
PTZ Type
There are two options: local/remote.