Web Basic Operations
24
Parameter
Description
User
Name/Password
Enter the user name and password to log in the remote device.
Channel No.
Enter the
Channel No.
or click
Connect
to get the total channel number of
the front-end device.
It is recommended to obtain the channel number of the front-end device by
clicking
Connect
. If the total number of channels entered does not
conform to the channel number of the front-end device, it might cause
adding failure.
Remote Channel
No.
After getting the remote channel number, click
Set
to get the number of the
channel needed to connect.
Channel
The channel number of the remote device in the local device. Configure
the remote device in the corresponding channel of the local device. For
example, configure the channel name and it corresponds to this channel
number.
Service Type
Set the corresponding service type of the remote device.
Different manufacturers support different service types. See the actual
interface.
When the remote device is connected through private protocol, the
default connection type is TCP.
3)
Click
OK
to complete the adding.
Batch add
Batch add only supports to add the remote devices in the same network segment.
1)
Click
in the
Manual Add
area and select
Batch Add
.
The
Add
interface is displayed. See Figure 3-13.
