Web Basic Operations
10
3
Web Basic Operations
The system supports device access and management through Web on Personal Computer
(PC).
The Web client system provides functions such as information viewing, storage management,
system configuration and monitoring playback.
The following contents are only for your reference. Different models have different functions.
You need to refer to that displayed actually.
3.1
Connecting the Network
Before logging in Web on PC, you need to connect the device and PC to the same network and
confirm the network between them is normal.
Connect the device to the network.
Set IP address, subnet mask and gateway IP for PC and the device respectively.
If there is no routing device in the network, assign IP address of the same network
segment for PC and EVS devices.
If there is routing device in the network, set the corresponding gateway IP and
subnet mask for PC and EVS devices respectively.
The Ethernet ports of EVS device have different factory default IP.
Single control device: Network card 1 to network card n corresponds to default IP
192.168.1.108 to 192.168.n.108.
Double control device: Different slots have different default IP.
Slot 1: Network card 1 to network card n corresponds to default IP
192.168.1.108 to 192.168.n.108.
Slot 2: Network card 1 to network card n corresponds to default IP
192.168.1.109 to 192.168.n.109.
The port order is standard card, expansion card and Web management card. You
need to confirm the default IP according to the actual device condition.
On PC, execute the command of
ping
192.168.1.108 (192.168.1.108
refers to the
device IP address) to check if the network is connected.
3.2
Initializing the Device
When you log in the device for the first time, you need to set the login password of the
administrator account (the default user name is admin).
Open the browser and enter the IP address in the address bar.