13
2.6.3 Configure the VTO
Select the VTO outdoor station from the device list.
Tap the MAIN button to indicate the VTO is the primary outdoor station.
Enter the Local IP Address, Subnet Mask, and the Gateway address for the VTO.
Tap the NTSC video standard.
Select the date and time formats.
Set the current date and time.
Tap OK.
Answering a Call from a VTO
To verify that a VTH unit is configured properly, make a test call from a VTO unit.
Dial the VTH room number from the VTO unit.
The VTH unit displays the video feed and the operating keys from the VTO if all settings
are configured properly.
Note in the image below that the Snapshot and Record keys are active. These active functions
indicate that the VTH has an SD card inserted in the unit.
