6
2
Installation and Configuration
The Video Intercom kit ships with all the components to mount the VTO Outdoor Station to
surface of a wall. To flush-mount the VTO, order the VTM114 Flush-mount box. Before
installing the camera consider the following:
Review the “Installation Tips” section to help you choose an ideal mounting location.
Decide whether to run the cables through the wall or along the wall.
Installation Tips
To ensure the best possible performance, it is recommended to keep the following installation
tips in mind when choosing a location for each component:
Do not install the devices in an environment exposed to condensation, high temperatures,
direct sunlight, and a dusty or corrosive area.
If any component does not properly power up, remove the PoE network cable. Power on
again after troubleshooting.
It is recommend professional CCTV professionals install and configure the components.
Do not dismantle, remove the outer housing, or attempt repair on any component. Contact
Technical Support if a component is not properly working.
The suggested installation height of central point of the VTO device is 1.40 m to 1.60 m
(55.12 in. to 63.0 in.) above the ground.
VTO Installation
This equipment should be unpacked and handled with care. If an item appears to have
sustained damage during shipping, notify the shipper immediately.
Verify that all the parts listed below are included. If an item is missing, contact customer
support or your local representative.
The original packing carton is the safest container to transport the unit, in the event the unit
must be returned for service. Retain the carton and all shipping material for future use.
