User’s Manual
56
Figure 4-59 SMTP (email)
Step 2 Configure the parameters as needed.
Table 4-29 SMTP (Email) parameter description
Parameter
Description
SMTP Server
IP address of the outgoing mail server that complies with SMTP protocol.
Port
Port number of the outgoing mail server complying with SMTP protocol.
It is 25 by default.
Username
Username of sender mailbox.
Password
Password of sender mailbox.
Anonymity
For servers supporting anonymous email, you can log in anonymously
without entering username, password, and sender information.
Sender
Email address of the sender.
Encryption Type Select encryption type from
None
,
SSL
and
TLS
.
Title
You can enter no more than 63 characters in English letters and
numbers.
Mail Receiver
Email address of the receiver. Supports 3 addresses at most.
Attachment
Select the check box to support attachment in the email.
Interval
The interval of sending emails.
Health Mail
The system sends test mail to check whether the connection succeeds.
Select the
Health Mail
check box, and configure the
Update Period
, and
then the system sends test mails according to the defined period.
Test
Test whether the email function is normal. If the configuration is correct,
the email address of the receiver will receive the test email. Save the
email configuration before running rest.
Step 3 Click
Save
.
4.5.3.4 IEEE802
The IEEE802 standard helps authenticate and secure network by providing authentication for
devices trying to connect with other devices on LANs or WANs. You can configure the
parameters of the standard to make it work.
