Web Interface
78
GainAuto
Amplify the video signal to increase image brightness. If the value is
too big, there will be more noise in the image.
SceneMode
Adjust the video to adapt to different scenarios. You can select from
Automatic
,
Sunny
,
Night
and
Disabled
. It is
Automatic
by default.
Day/Night Mode
You can select from
Automatic
,
Colorful
or
Black White
mode.
BackLight Mode
You can select from the following modes:
Disabled
: no back light.
BackLight
: the camera gets clearer image of the dark areas on
the target when shooting against light.
Wide dynamic
: the system dims bright areas and compensates
dark areas to ensure the clarity of all the area.
Inhibition
: the system constrains bright areas and reduces halo
size to dim the overall brightness.
Mirror
Select
On
, and then the image would display with left and right side
reversed.
Flip
Select
On
, and then the image would be displayed upside down.
7.7.2 Audio Set
Select
System Config > Video Set > Audio Set
, and then the
Audio Set
interface is displayed.
See Figure 7-28. You can adjust the volume of the MIC and the speaker on the VTO.
Click
Default
, and then the volume of the MIC and the speaker are restored to default
configuration.
Audio Set
Figure 7-28
User Manager
7.8
You can add, delete, or modify Web user information.
Select
System Config > User Manager > User Manager
, and then the
User Manager
interface is displayed. See Figure 7-29.
User Manager
Figure 7-29
7.8.1 Add User
You can add users with all the authorities except adding user and admin user management.
