Web Interface
66
LAN config
Figure 7-11
Configure parameters. See Table 7-6 for the details.
Step 2
Table 7-6 LAN config parameter
Parameter
Description
No.
The number of the VTO.
If the VTO you are visiting works as SIP server, the
No.
is not editable. For
the configuration of SIP server, see "7.6.3 SIP Server Config."
Support Group
Select
Turn on
to enable group call, and when the VTO is calling a VTH,
all the extension VTH would receive the call.
After turning on or off the group call, the configuration takes effect after the
VTO reboots.
Server Type
Select the SIP server type.
If VTO works as SIP server, select
VTO
.
If third party server works as SIP server, select the type you need.
Click
OK
to save.
Step 3
7.4.2 Residence Config
This section introduces how to configure the beginning building and unit number, unit layer
amount, and room amount in one layer.
This function is valid only when VTO works as SIP server.
Select
System Config > LAN Config > Residence Config
.
Step 1
The
Residence Config
interface is displayed. See Figure 7-12.
