Configuring Devices
16
Enter the
IP address, subnet mask, and default gateway you planned, and then click
Step 2
OK
.
The VTO will reboot after modification, and then there might be two conditions.
If the PC IP address is within the planned network segment, the login interface with
newly modified IP address is displayed, and you can login.
If the PC IP address is not within the planned network segment, you need to
modify its IP address and add it in the planned network segment, and then you can
login.
5.1.1.3 LAN Config
You can configure the type of the SIP serve and the number of the VTO. SIP server is required
in the network to transmit intercom protocol, and all the VTO and VTH devices connected to the
same SIP server can make video call between each other.
Select
System Config > LAN Config
, and then the
LAN Config
interface is displayed. See
LAN config
Figure 5-6
If VTO works as SIP server
Select
VTO
in
Server Type
, and then click
OK
.
If third party server (Express by default) works as SIP server
Select the server type you need in
Server Type
, and then click
OK
.
When third party server works as SIP server, you can select
Turn on
at
Support Building
and
Support Unit
to configure building and unit number. For the detailed configuration, see the
corresponding manual.
5.1.1.4 Configuring SIP Server
Select
System Config > Network Config > SIP Server Config
, and then the
SIP Server
Config
interface is displayed. See Figure 5-7.
