manualshive.com logo in svg

Dahua Technology VTH5422HB-W, User Manual

Share
Download
Dahua Technology VTH5422HB-W User Manual Download Page 69

Figure 3-37 Time setting

Step 3

Configure the time parameters.

●

Select the date format and the time zone.

●

Tap NTP.

If enabled, configure the address, port of the NTP server and the interval. The VTH

will synchronize time with the NTP server.
If you turn off NTP, configure the time and time zone manually.

●

Tap DND.
If enabled, configure the start and end time, and then select the days that you want to

repeat the DND mode. You will not receive any call or message during this period.

You can directly enable DND  by tapping 

 on the home screen. Tap it again to turn

it off.

3.6.6.2  Display Setting

Set VTH screen brightness, screensaver time and turn off the screen to clean it.

The snapshots are for reference only, and might differ from the actual screen.

Procedure

Step 1

Tap Setting.

Step 2

Select 

  > Display.

62

Summary of Contents for VTH5422HB-W
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands