User’s Manual
12
Parameter
Value
24 H Protection Zone
Status
Active status of the 24 h protection zone.
●
: Enable.
●
: Disable.
Transmit through
Repeater
The status of whether the PIR forwards its messages to the hub
through the repeater.
The function is only available when the version of the DMSS app is 1.96
or later, the hub is V1.001.0000000.6.R.211215 or later, and the PIR is
V1.000.0000001.0.R.20211203 or later.
Program Version
The program version of the PIR.
6.2 Configuring the PIR
On the hub screen, select a PIR from the peripheral list, and then tap
to configure the
parameters of the PIR.
Table 6-2 Parameter description
Parameter
Description
Device Configuration
●
View PIR name, type, SN and device model.
●
Edit PIR name, and then tap
Save
to save configuration.
Area
Select the area to which the PIR is assigned.
Temporary Deactivate
●
Tap
Enable
, and then the function of the siren will be
enabled.
Enable
is set by default.
●
Tap
Only Disable Tamper Alarm
, and then the system
will only ignore tamper alarm messages.
●
Tap
Disable
, and then the function of the siren will be
disabled.
LED Indicator
LED Indicator
is enabled by default.
●
If
LED Indicator
is disabled, the LED indicator will remain
off regardless of whether the PIR is functioning normally
or not.
●
The function is only available when the version of the
DMSS app is 1.96 or later, the hub is
V1.001.0000000.4.R.211014 or later, and the PIR is
V1.000.0000001.0.R.20210818 or later.