34
5. To remove control panel assembly.
(1) Disconnect two connector and terminals on the
printed circuit board assembly and remove a screw
0
holding the grounding ring terminal
9
of Main
harness, which secured front plate.
(2) Remove two screws holding control panel
assembly to the oven front. At the same time, draw
forward the control panel assembly from oven front.
(3) Remove the push lever
7
.
(4) Remove three screws
8
from the control.
(5) Remove push button
3
and button spring
4
from
control panel
1
.
(6) Reverse the above steps for reassembly.
NOTE : Do not attempt to remove membrane key board
2
except for replacement.