Daewoo FRS(N)-U20IA, Service Manual

Page: 52 / 143

51
NO
DISASSEMBLING PROCEDURE NO DISASSEMBLING PROCEDURE
1 4
3 6
▷
Separate 2 housings of 10P / 7P
from Front PCB.
(Do not hold only wires to pull out.)
▷
Unscrew (3 points) to remove Sol Valve.
▷
Unscrew (2 points) to remove Box
Dispenser Shut.
▷
Unscrew (1 point) to remove Cover Ice Flap.
2) How to Check Micro Switch
8-4. Dispenser Solenoid Valve
1) Disassembling Procedure
SPEC. CRITERION
▷
Good : 215
Ω
(
±
10%)
(193 ~ 236
Ω
)
▷
DEFECTIVE : 0
Change Sol Valve.
PARTS HOW TO CHECK
▷
GOOD : 96
Ω
(
±
8%)
(88 ~ 104
Ω
)
▷
DEFECTIVE ;
Change Flap Heater AS.
▷
SPEC. NAME
:SOL2003-01B
▷
VOLTAGE
:220/240V,50Hz
▷
VOLTAGE
:DC 12V,1.5W
▷
Check resistance value of
both terminals with a tester.
Dispenser
Sol Valve
Flap Heater
Assembly
▷
Check resistance value of
both terminals with a tester.
2 5
▷
Insert (-) screw driver into bottom left groove
of Cover Dispenser Box. Pull forward with a
snap.(Be careful not to damage cover and
door surface.)
▷
Separate 2 terminals from Sol Valve and
2P Housings from Cover Ice Flap.