20
19
Installation
Appendix
This appliance must be earthed. In case of failure or damage, earth can provide a minimum
resistance to reduce the possibility of electric shock. The power cord has grounding wire with
device and power cord with plug. Plug must be inserted into a properly installed and grounded
socket (In accordance with all local rules and standards).
Earth note :
A separate earth is required by some local rules. In that case, you need to buy a grounding
wire, clips and screw. This should be fitted by a suitably quaified person.
Procedure:
It’s not necessary to discharge the condensed water to the tank, it can be drained out directly.
Change drainpipe
Pull out the water pipe by means of the arrow direction. Then install the drainpipe.
Use pilers as it can be difficult to do.
Water discharge
1. Adjust the level to avoid vibration and noise.
Machine must be placed in a clean place, no water, ice and combustible materials there.
To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm,
level surface.
2. If the tumble dryer is not completely levelled, adjust the front feet. Lower the dryer by turning the
feet anti-clockwise and the ascend it by turning clockwise till the appliance will not shake.
Level adjustment
Removing transport safety packaging foam
Caution!
Before using the machine, the packaging foam must be removed from the drum.
1. Open the loading door.
2. Pull off adhesive strips from inside machine on top of drum.
3. Remove the two packaging foam from the machine.
two packaging foam
건조기_DWRCB8011(영).indd 22
2014-05-13 오후 5:10:25