16
15
Care and cleaning
Use Process
Water receiver collects all of the water from condenser. Water receiver need to be emptied after
each use. Otherwise drying performance will be affected. If water receiver is full, 'overflow light' will
be illuminated and buzzer sounds. Under this situation, water receiver must be emptied within one
hour.
Water receiver emptied
Condenser is one of the most important parts to ensure effective drying. Therefore needs special
attention. We suggest you clean the condenser three or four times every year.
(Notice : When the condensor is not in the proper position, the alarm will ring.)
Cleaning the condenser
1. Pull out water receiver
2. Empty wasie water
1. Open condenser cover
2. Move two pieces of lock rod, pull out the
condenser
3. Push the water receiver in dryer
4. Press the Start/Hold button
3. Put the condenser under the tap to make water through completely by clean condenser.
4. Install the condenser following the above steps, but in reverse order.
건조기_DWRCB8011(영).indd 18
2014-05-13 오후 5:10:23
