10
9
Use
Use Process
All drying programs end with 10 minutes cooling phase. If the laundry is not removed at the end
of the cycle, the dryer performs an anti-creasing phase (duration:30 minutes maximum). If you do
not remove the laundry ,the machine will remain in the standby status, after the anti-creasing phase.
The display shows “ End” and the buzzer sounds for 15 seconds if you have selected the buzzer.
Press the Power, all the signal light will close.
At the end of the programme
Clean the filter.
Important
If the drying programme has to be stopped before it reaches the end, we recommend that you
turn the programme selector dial to position “Air Dry” and wait until the end of this cooling phase
before removing the laundry. This will avoid a build-up of heat inside the appliance. To do this first
turn the on-off switch and then turn to “Air Dry” and press the “Start” button.
Modifying the programme
Turn off the machine to restart a programme.
After each use
건조기_DWRCB8011(영).indd 13
2014-05-13 오후 5:10:22
