16
15
Care and cleaning
Use Process
In the movement process, this device is used for induction clothing humidity, it means that it must
be cleaned periodically. Calcium oxide build up on the sensor surface should be cleaned off.
Humidity sensor
1. Open the door, put your hand into the drum of the dryer, use screw driver unscrew two pieces of
screw, and take out the lamp cover.
2. Remove the lamp by turning counter clockwise. Be careful, do not let the lamp fall.
Install the new lamp and lamp cover with the reverse direction.
Lamp replace (options) on some models
건조기_DWRCB8011(영).indd 19
2014-05-13 오후 5:10:24
