4
2. INSTALLATION
INSTALLATION
■
Transit bolts
The appliance is fitted with transit bolts to prevent internal damage during transport.
■
Removing transit bolts
1. Before operating the washer, remove the
transit bolts(3ea) along with the rubber.
2. Unscrew the 3 bolts with the 10mm hex
wrench or spanner or cross-tip screwdriver.
Keep the 3 bolts for a later time.
• When the appliance is transported, transit bolts
will be re-used.
3. Close the holes with Cap holder supplied.
CAUTION : If the bolts are not removed, it may
cause heavy vibration, noise and
malfunction.