10
MAINTENANCE
■
Cleaning the water inlet filter
• "IE" error message will blink on the control panel when water does not enter the detergent drawer.
• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
• It is therefore a good idea to clean it from time to time.
■
Cleaning the drain pump filter
• The drain filter collects threads and small objects left in the laundry.
• Check regularly that the filter is clean to ensure smooth running of your machine.
CAUTION Be careful when draining if the water is hot.
1. Open the lower cover(
1
) by
using a coin. Turn the cap
hose(
2
) to pull out the hose. Pull
out the hose maximally. (About
13~14cm.)
2. Unplug the cap hose(
2
), allowing
the water to flow out. At this time use
a vessel to prevent water flowing on
to the floor. When water does not
flow any more, turn the pump
filter(
3
) open to the left.
3. Remove any foreign material
from the pump filter(
3
). After
cleaning, turn the pump filter
clockwise and insert the cap
hose(
2
) to the original place.
Close the lower cover.
2
3
2
3
1
1
13 1
13 1
2
3
2
3
1
1
13 1
13 1
2
3
2
3
1
1
13 1
13 1
1. Turn off the water
tap.
3. Clean the filter
using a had
bristle brush.
2. Unscrew the
water inlet
hose.
4. Tighten up the
inlet hose.