39
TROUBLESHOOTING GUIDE
SYMPTOM
CAUSE
SOLUTION
Washer does not start.
Electronical power cord may not be
plugged in or connection may be loose.
Make sure plug fits tightly in wall
outlet.
House fuse blown, circuit breaker
tripped, or a power outage has
occurred.
Reset circuit breaker or replace
fuse.
Do not increase fuse capacity.
If problem is a circuit overload, have
it corrected by a qualified electrician.
Water supply tap is not turned on.
Turn on water supply tap.
Washer will not spin.
Check that the door is firmly shut.
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take a
few moments before the clothes
washer begines to spin. The door
must lock before spin can be
achieved.
Door does not open.
Once started, the door can not be
opened for safety reasons.
Wait two minutes before opening
the door to give the electric locking
mechanism time to release.
Wash cycle time delayed.
The washing time may vary by the
amount of laundry, water pressure,
water temperature and other usage
conditions.
If the imbalance is detected, the
wash
time shall be increased.
The washer will stop
during spinning .
Spinning is insufficient.
PFE error due to much detergent and
unsuitable detergent.
If PFE error mode was displayed on
the control part, in order to solve this
problem, first turn off the power of
the washing machine, second turn
on the power pressing Power
button, third press SPIN button and
last press Start/Pause button.
