7
POINTS TO REMEMBER
• Avoid using excessive amounts of bleach, soap powder or detergent. Use the
amount recommended by the respective manufacturers.
• If the machine is installed in areass subject to freezing temperatures, ensure
that it is completely drained after use.
• To reset to the OFF position (“0”), turn anticlockwise.
• When washing delicates e.g., siks, fine nylons, lace, etc., it is advisable to place
them in a mesh bag to prevent the possibility of damage.
• Do not wash lint attraching fabrics with lint producers, e.g., black socks or dark
coloured jumpers with white fluffy towels, napkins, etc.
• Avoid placing a wet load on the control panel.
BEFORE YOU CALL FOR SERVICE
There may be times when you suspect your washing machine requires
maintenance. Before calling for a service engineer, please check the following
points, to save unnecessary cost. You may be pleasantly surprised that an
apparent malfunction can be easily rectified by following the chart below.
If you washing machine will not start, check whether.
• The house circuit breaker is tripped or a fuse is blown.
• The cord is firmly connected to the power point or the power is not switched
on.(Check with a small table lamp or toaster, etc.)
• Something is preventing the pulsator from rotating.
• The wash timer is set.
If the spin dryer will not operate, check whether.
• The door spin inner and door spin outer are closed.
• The spin dry timer is set.
If there is excessive noise, check whether.
• Something is touching the pulsator as it rotates.
• The machine is placed on a level surface.
• The wash load in the spin basket is excessively unbalanced during the spin cycle.
• An article is lodged between the spin basket and tub.
MAINTENANCE AFTER USE
Wash Day Maintenance
At the end of each wash day:
• Switch off the electricity at the power point.
• Check that both timers are set to the OFF position(“0”)
• Wipe off spillage from wash powder, etc., and generally wipe over the tub and
base under with a clean damp cloth.
• Remove the hose from water tap.
* Design and specifications subject to change without notice.
`
7
