Daewoo DTM-29U7Z SERIES, Service Manual

Page: 7 / 50

6
* How to Enter the “ Service Mode ” with user remocon.
1) Set the TV Pr 91
2) Sharpness “ MIN “ control.
3) Push the Red, Green, Menu buttons in regular sequency within 5 seconds after setting TV power off.
4) You can see the Menu of “ service mode “ on the screen.
5) The PR UP/DOWN buttons on the remote controller are used to move the selection bar up or down the Menus.
6) The VOL UP/DOWN buttons on the remote controller are used to adjust levels.
7) If you want to exit from “ Service Mode “ then power the TV off.
- You can see the SVC Menu by OSD in TV set.
ALIGNMENT INSTRUCTIONS
Tuner is
Flat Option
Svm SVG
Svm SVD
Svm SVDEL
Svm SVCOR
Bcl Thres
Bcl Tc
Bcl Gain
Nor1 Bright
Nor1 Cont
Nor1 Color
Nor1 Sharp
Nor1 Tint
Nor2 Bright
Nor2 Cont
Nor2 Color
Nor2 Sharp
Nor2 Tint
Dolby3411
Phi
NO
020
001
013
012
430
250
511
038
058
038
032
032
038
038
038
032
032
NO
Osd Contrast
Osd Bright
Text Gain
Tilt Option
Transparent
Vertical angle
Vertical bow
380
000
NO
NO
NO
000
000
V. Slope
V. Center
V. Size
S. Curve
H. Center
H. Width
EW. Para
EW. Cor Top
EW. Cor Low
EW.Sym
R. Bias
G. Bias
B. Bias
R. Drive
G. Drive
B. Drive
G2 Adjust
Sub bright
Double TEXT
Wide Option
-002
887
091
035
-325
088
-068
015
015
-013
330
330
330
370
370
370
000
000
514
NO
SVC v1
CP-820