Daewoo BH090, Manual

Page: 115 / 261

113
Don’t eject during tape playing
Radio operation
Turn on the power switch(1) by turn-
ing rightly the knob in the amplifier
part.
Select the button(2) and press any of
RADIO, TV, TAPE, MIC, and control
the tone fittingly, and push the
knob(1) control the balance fittingly
and control the volume knob(1).
Push the band button(15), select the
FM/AM affirmed indicator.
Select board casting turning the
knob(17) manualy, or automatically
boardcasting lony push the AS/PS
button(16) more 2 seconds.
Ү
TUNING : Turning the knob(17) to
enhance the low and high
sound.
Ү
PUSH SEEK : Received the board-
casting automatically
by pushing the button
once or more.
Ү
AS/PS : Pushed the button(16) more
2 seconds longly, search
the band automatically and
remember
the 1st~6th
boardcasting but, shortly
push the button, searched
the boardcasting in memory
once more push the this
button stop the searching.
Each remembered the boardcasting in
button(11), 18th boardcasting is
remembered on AM1, FM1, FM2
each button.
Controlled the high volume by turning
the knob(9).
Turn on the power, controlled volume
and balance and the AMP volume like
to RADIO operation insert tape in to
the slot(12), then tape play starts
automatically.
Press the button(14) to rewind of for-
ward the tape fastly and inverted
direction of playing the tape.
Direction of play displayed the indica-
tor(13) press the eject button(10),
tape is ejected. through tape slot.
Cassette tape player
Turn on power(1) by turning to knob
to right(In state of main power is on
of amplifier)
Controlled the volume, balance and
AMP. volume replayed the sound by
inserting the tape on tape slot(12)
press the button(14). Tape is Reward/
Forward fastly press the button(7)
tape direction is automatically reverse
at time and indicator lamp(19) light
comes on.
Controlled the right/low tone by turing
the knob(9) press the eject button(10)
tape is ejected through tape slot.