daewon DIB-N800 Series, User Manual

Page: 14 / 20

26 27
기본기능
Expert mode Expert mode
simultaneously
simultaneously
Silence mode on/off
Select water pressure “-”while Stop is selected and
held to lower the volume of the beep sound.
The volume of the beep sound will be lowered after
getting out of Expert mode.
Deactivate the seat sensor override.
Select water pr/- simultaneously to enter
automatic pulsation wash setting mode.
Select and hold Rear wash for 3 seconds to initiate/
cancel automatic oscillation rear wash. 2 LEDs(green/
red) of the energy saving blink with 1 beep when it
is activated and only 1 LED (red) blinks with 2 beeps
when it is deactivated. Front wash, Turbo wash and
Child wash can be set in the same way.
In the case of Child wash, Child pulsation wash is
deactivated first instead of being activated as it is set
basically.
20sec front wash → 20sec front oscillating wash →
20sec front oscillating/pulsating wash.
Automatic pulsation wash on/off
Select nozzle position
◀ ▶
simultaneously to enter
automatic oscillation wash setting mode.
Select and hold Rear wash for 3 seconds to
initiate/cancel automatic oscillation rear wash. 2
LEDs(green/red) of the energy saving blink with 1
beep when it is activated and only 1 LED (green)
blinks with 2 beeps when it is deactivated. Front
wash and Child wash can be set in the same way.
In the case of Child wash, Child oscillation wash is
deactivated first instead of being activated as it is
set basically.
20sec front wash → 20sec front oscillating wash →
20sec front oscillating/pulsating wash
Automatic oscillation wash on/off
This feature can be set regardless seat sensor override.
Select Water temperature while Stop is selected and
held to initiate/cancel the automatic deodorize.
2 LEDs(green/red) of the energy saving blink with 1
beep when it is activated and only 1 LED (red) blinks
with 2 beeps when it is deactivated.
Automatic deodorize on/off Water pressure and nozzle position change
Activate the seat sensor override
Basically, the water pressure and nozzle position are
stored and are maintained from the previous user's
settings, but these can be ignored and automatically
be changed to the presets as soon as the seat is
unoccupied.
Adjust the nozzle position and water pressure and
select and held Rear wash for 3 seconds.
2 LEDs(green/red) of the energy saving blink with 1
beep when it is activated and only 1 LED (red) blinks
with 2 beeps when it is deactivated. Front wash, Turbo
wash and Child wash can be set in the same way.
Adjust the dryer temperature and select and held Dry
for 3 seconds.
2 LEDs(green/red) of the energy saving blink with 1
beep when it is activated and only 1 LED (red) blinks
with 2 beeps when it is deactivated.
3 seconds