daewon DIB-N800 Series, User Manual

Page: 11 / 20

20 21
Operations
Nozzle position
Select
◀
/
▶
during a wash cycle to adjust the nozzle
position forward and backward.
The 5 LED indicator lights will indicate different positions
selected.
Settings will be saved for the next use.
Child wash (automatic wash)
Select a Child wash button to initiate an child wash that
offers from the wash until the drying function for children
and seniors.
Rear wash 20 seconds → Rear wash oscillation 20
seconds → Rear wash oscillation with pulsation for 20
seconds → Dry for 2 minutes will consecutively work.
Seat temperature
Water temperature
Deodorizer
Select a water temperature button to adjust the seat
temperature to 1 of 4 settings.
Room temperature/off
→ low/green(34°C/93.2°F) →
medium/yellow(37°C/98.6°F) → high/red(40°C/104°F)
Settings will be saved for the next use.
This bidet seat is an instant heating system with the
latest technology applied, and it does not consume any
electricity for the water heating in standby mode, saving
electricity.
If the bidet seat is used in a very cold area with high
water pressure, the warm water may not reach the set
temperature. Refer to the precaution in this manual.
The deodorizer starts automatically when a user sits on
the seat. It continues to run for one minute after the
seat has been vacated.
The deodorizing cartridge is semi-permanent but needs
to be cleaned regularly with a brush.
Water pressure
Select a rear/front/turbo wash button to adjust water
pressure by +/- button. (5 levels)
If you feel that the water pressure is weaker than
usual, there may be small debris stuck in the water
supply screen filter or inline filter. Refer to maintenance
instructions in this manual.
Pulsation
Select a pulsation button to initiate pulsation while
rear/front/turbo is running that enables the water
to repeatedly increase and decrease in pressure in a
pulsating pattern.
To cancel pulsation, select the pulsation button again.
Operations
Select a seat temperature button to adjust the seat
temperature to 1 of 4 settings.
Room temperature/off
→ low/green(34°C/93.2°F) →
medium/yellow(37°C/98.6°F) → high/red(40°C/104°F)
Settings will be saved for the next use.
If the seat is used 15 minutes consecutively when the
seat temperature is set at medium and high, the seat
temperature will be lowered automatically down to
35°C/95°F by 1°C/1.8°F every 5 minutes.
For safety, this bidet seat uses a low voltage for a heated
seat. It may take a little while to be heated at the
beginning.
※ Applicable models only
Dry
Select a dry button to initiate a 3 minutes air dryer cycle.
Dryer air temperature can be adjusted by +/- button. (5
levels)
For dryer air temperature when using in a cold
environment, refer to the cautions in this manual.
※ Applicable models only
If the stronger water pressure is preferred while a rear/
front wash, select and hold a button for 3 seconds
to change to 2X mode. 2X mode starts from Level 3
regardless previous setting.
Select and hold a rear/front wash button for 3 seconds
to initiate 2X mode rear/front wash.
Select once again to initiate nozzle oscillation. To cancel
the oscillation, select again.
To cancel 2X mode, select and hold a rear/front wash
button for 3 seconds.
Do not use 2X mode wash excessively and consult with a
doctor first if you have any anal disease or are sensitive.
For warm water temperature when using in a cold
environment, refer to the cautions in this manual.
2X mode
3 seconds
low medium high
low medium high